Wood peeling machine, also named wood debarker, is an important part of pulping and papermaking, wood processing, wood chip production and other industries. It is widely used in paper mills, wood chip mills, plywood mills, logging plants, etc. Using the wood peeling machine can greatly save the labor force and reduce the cost of raw material processing.
The wood peeling machine currently produced by our company consists of two models: vertical peeling machine and horizontal peeling machine. There are corresponding machines for different output and quality requirements of users. Our wood peeling machine can effectively remove the bark of the wood, and will not cause too much damage to the wood itself. This machine has strong applicability to wood. It can peel wood of different tree species, diameters, lengths, and shapes. It is perfect supporting equipment for assembly line operations and automated production.
Introduction of the wood debarker
Our new wood debarking machine is mainly composed of the main machine, feeding mechanism, peeling part, discharging mechanism, transmission device, etc.
Vertical peeling machine
This wood debarker machine is the practical wood peeling equipment, which can peel all kinds of logs with a diameter between 50mm and 320mm and over 500mm in length. This efficient log peeler machine has high working efficiency and wide applications for peeling wood with lots of fiber, such as needle wood, pine trees, etc.
Principle: The working principle of the vertical wood peeling machine is that the front and rear feeding and discharging devices bite the wood, and the wood is pushed forward under the action of the conveyor belt. During the advancing process, the roller with blades located in the middle of the machine continuously acts on the surface of the wood, causing the bark to fall off to the bark below. During the whole process, the wood advances at a constant speed, and the peeling effect is excellent, which can meet the demand for high-quality wood.
Horizontal peeling machine
This debarker can feed wood in large quantities at a time, and can be equipped with a conveyor belt to meet the needs of feeding, discharging, and bark. This trough wood debarker machine is the efficient wood peeling equipment, which can peel all kinds of logs and branches with the diameter between 50mm and 320mm and over 500mm in length. This efficient log peeler machine has high working efficiency and wide applications for peeling wood with lots of fiber, such as needle wood, pine trees, etc. Different from the drum type log debarker, this groove wood peeling machine is more efficient for peeling wood branches or logs in bulks of the large wood processing plants. After peeling, these log peels will be discharged from the bottom of this peeler machine. And the peeled logs can be further processed into high-quality wood chips with the wood chipper machine.
Principle: The trough-type wood peeling machine uses the unique force generated by the rotor with peeling teeth to make the wood section cyclically move around the silo trough plate, and it also rotates around the wood section’s own axis, as well as irregular beating. At this point, the wood segment and the teeth, the wood segment and the wood segment, and the wood segment and the bin groove are constantly rubbing, impacting, squeezing, and the bark is quickly separated to achieve the peeling effect.
Applications of wood peeling machine
This series of wood peeling machines are widely used in paper mills, wood-based panel mills, wood chip mills, forest farms and other industries. It has a wide range of applications, not only for large pieces of wood, logs, branches, and irregularly curved wood but also for peeling some frozen wood and dry wood. The peeled wood will have better quality and they are more suitable for producing superior products.
Working video about the wood debarker
Vertical peeling machine
Horizontal peeling machine
Parameter of the wood peeling machines
| Vertical peeling machine | ||
|---|---|---|
| Model | WD-260 | WD-300 |
| Max diameter | 260mm | 300mm |
| Knife quantity(pcs) | 4 | 4 |
| Main power(kw) | 7.5 | 7.5 |
| Driving power(kw) | 1.5 | 1.5 |
| Weight(T) | 1.2 | 1.5 |
| Size(L*W*H)(m) | 2.2*1.3*1.1 | 2.5*1.8*1.1 |
| Horizontal peeling machine | ||
|---|---|---|
| Model | WD-700 | WD-800 |
| Max diameter | 400 | 500 |
| Wood length(m) | 2-5 | 2-6 |
| Capacity(T/H) | 10-12 | 15-18 |
| Power(kw) | 11*2 | 15*2 |
| Weight(T) | 3.5 | 6 |
| Size(L*W*H)(m) | 6*2.5*1.6 | 6*2.8*1.7 |
